Floor Mounting Bi-Block GSDF180 Monoblock Unit
Click Image for Gallery
Unit Model: GSDF180
- Dual flow evaporator with 6 poles fans.
- Soundproof compressor housing.
- Compressor crankcase heater.
- 6 pole condenser fan motor.
- Electronic control panel.
- Expansion device with thermal expansion valve.
- Liquid receiver in conformity with “Pressure equipment Directive” 97/23/EC.
- Liquid line consisting of shut off valve on receiver, filter and sight glass.
- All units are equipped with fixed calibration low and high pressure switches, in accordance with the “Pressure Equipment Directive” 97/23/EC.
- Solenoid valve on liquid line.
- Connection pipes couplings between condensing unit and evaporator have been realized without shut-off valves or weld neck flanges.
- Pre-arrangement for room lighting connection and for door switch connection.
- Direct drainage of condensate.
- Condensing unit installation on the external floor of the cold room as well as evaporator installation on the ceiling inside the cold room.
- All the units are supplied with a remote control panel already connected to the unit through a 5 m long cable (on request we could supply different lengths up to 20 m).
- Units suitable for external installation. Units recommended for use at ambient temperatures higher than 10°C. If units are mounted in Ambient temperature lower than 10°C, some accessories are needed.
Technical Data :
- Form: 1I3
- Fin pitch: 2,1
- Fans: 1x400
- Fan absorption: 1x120
- Airflow: 3290
- dBA(10mm): 41
- Form: SHDS114N32
- Fin pitch: 3
- Fans: 1x330
- Fan absorption: 1x85
- Airflow: 1300
- Air-throw: 2x5
- dBA(4mm): 40
Refrigerating capacity (W) - Room volume (m³)
Cold room temperature: + 12 °C
Ambient temperature: + 35°C
- W: 5470
- m³: 60*
* = 93 W/m³ max